Fantasy Football Draft Strategy 2022


Draft strategy from 2nd place in a 12-team non-PPR league (2022)

Playing in non-PPR leagues slightly devalues ​​the wide receiver and can destroy the values ​​of the running back catching passes. This inherently increases the importance of landing a workaholic who returns early and often. Since all that matters in non-PPR leagues is yards and touchdowns, it also devalues ​​versatile running backs such as Austin Ekeler as he will have to repeat his career year in touchdowns (20)s. he will end up as the best running back once. again – he just doesn’t get the number of runs needed to finish top. On the other hand, running backs who don’t catch passes like Derrick Henry get a boost. Henry is undoubtedly the workhorse of the Titans who, when healthy, can consistently push for the title on the ground and is anything but a lock for 8-10 rushing touchdowns minimum. We are not going to push Ekeler too far in our

rankings excluding PPR

but Henry finds himself above him due to the heavy racing volume.

When selecting later in drafts, you won’t have the luxury of adding an RB2 to your squad who is a one-dimensional passer like JD McKissic or James White in recent years or this year’s rookie James Cook. Adding them will not have the same effect as if you were in a half league or a full PPR league. Last week I finished a draft of the

1st place in a PPR semi-league

where backup RBs that could catch were selected a bit higher than in this draft. At the end of each week, these RBs won’t be worth much if they don’t hit one in the end zone and therefore become very risky plays. For this reason, I usually like to load a few ball carriers in the first 5 rounds to make sure I have a good group of ball carriers. Take a look at the

ADP for non-PPR leagues

to see how it compares to half leagues or full PPR leagues.

With wide receivers, I don’t want to load them too early until I land a few decent running backs. Even in a league that has a few flex positions, there’s no real benefit to listing a WR there, unless the alternative is a backup running back who may not see much work this week- the. Some WRs have been known to get 40 yards per game and 8 catches – although that’s a nice baseline, in full PPR leagues he scores 12 points, while in non-PPR leagues that score drops to 4. In non-PPR leagues, draft the best player overall since you don’t have to worry about the point total you’d receive from an extra couple of strikes per game.

Let’s review a recent draft that I completed with an overview of how the draft went over the first few rounds, plus some comments on why I chose who I chose and mistakes that have been made along the way. I drafted based on the following league starting requirements: 1 QB, 2 RB, 2 WR, 1 Flex and 1 TE. The kicker and defense will be left out of the discussion as they are expected to be the last two picks in the draft.

Round One – Lock Your RB 1

Since Jonathan Taylor was the first to leave the board, Christian McCaffrey has been the choice. Even though I would select CMC first in a half-PPR league over Jonathan Taylor due to his overall advantage, I would give Taylor the go-ahead over him in a non-PPR league. Easy choice, second round.

Round Two – Best Player Available

A ton of RBs come off the board in the top 22 picks and now we’re faced with choosing the best player available – most often RB or WR. We could take Mark Andrews but I didn’t want to pick an early TE in this draft. That left me with Tyreek Hill and Mike Evans at WR, and Leonard Fournette or Cam Akers at RB. Chris Godwin wasn’t placed on PUP training camp, which looks positive for his overall look. And, as of this writing, the Bucs have just signed Julio Jones to a one-year contract. Mike Evans may have more competition than initially thought. I took Tyreek Hill with the pick because he’s an explosive playmaker who doesn’t rely on a ton of strikes per game to make a fantastic impact. He’s going to have a lot of work under there and go back to being a YAC monster under Mike McDaniel.

Third round – early tight end?

Mark Andrews was not selected by Team 1 and we are now faced with a choice – early TE, or add to our running back or wide receiver depth. Since this is a non-PPR league, I chose to add another running back in Cam Akers. He’s coming off a remarkable recovery from injury, and the Rams trusted him right away, including in the Super Bowl, where he received the majority of RB touches (although that didn’t amount to much at the time). era). Being the RB in the Rams offense has been invaluable and Akers is that much further from injury and has been able to prepare for the upcoming season.

Round Four – Running Backs > Wide Receivers

In round 4, I wanted to draft another running back because I wasn’t convinced Breece Hall would come back to me if I picked DJ Moore in round four. I’m happy with the choice because team 1 chose two ball carriers after my selection. Hall will see a ton of volume in the Jets offense and is unlikely to lose the role. Team 1 was forced to take AJ Dillon with their Round 5 pick not as good as they are in a half league or full PPR league. Hall should be able to pick up the most rushing touchdowns this year and should be able to get closer to 950-1,000 yards (or more) if all goes well – he’s that good!

Rounds five and six – Time for WR depth

After picking 3 RBs in the first 4 rounds, it was time to load up on some WRs. Fortunately, I had great value for me in the 5th and 6th rounds from DJ Moore and Brandin Cooks. Both are WR1s on their respective teams and both are underrated receivers in general. Both receivers should be able to go over 1,000 yards and a handful of touchdowns – with upside for a whole lot more. Round 5 and 6, as my WR2 and an option as a flexible play, I’ll gladly take that.

Rounds Seven & Eight – Best Players Available

The team now sits 3 per piece for RBs and WRs. Usually in the middle rounds I’ll try to take out the best player available from now on until we take a QB and a TE. I just missed Courtland Sutton as my WR4 so I picked Gabriel Davis as the consolation prize. Davis has a lot of upside as a WR2 at Buffalo as we know he finished the season against Kansas City with a ridiculous 4 touchdown game. Although we won’t get this every week, it’s a great game that’s flexible every week and offers depth. With my next pick I wanted Rhamondre Stevenson but I knew Team 1 already had 4 RBs – I was hoping he wouldn’t take an RB in the next two picks and went with JuJu Smith-Schuster. JuJu will be playing from the slot and should be able to rack up a ton of yardage with Patrick Mahomes, on a team desperately looking for their new WR1.

Rounds Nine & Ten – RB Depth and finally a TE

On lap 9, I was happy to see that Rhamondre Stevenson passed Team 1 and picked it up happily. He’s a player I like to target in these final rounds as it looks like James White’s injury hasn’t fully healed and Damien Harris is just a few fumbles away from losing his job. Stevenson is a passing threat, so he doesn’t get the extra 0.5 or 1 point per reception. In the 10th, I finally went with Zach Ertz as he should be the Cardinals’ primary target receiver during Hopkins’ 6-game absence to start the year. Even upon his return, Ertz has consistently commanded targets, moreover, for all 6 games he will be a top 10 TE and you can always look for a replacement if one appears on the waiver feed.

Rounds eleven to thirteen – Failed late QB and more RB depth

I usually like to pick a late QB, but I had a hard time landing one I liked. I picked Tua and Watson in back-to-back picks, which isn’t the worst pick, but I usually don’t like drafting 2 QBs if I can avoid it. Four teams drafted 2 QBs and one team drafted 3 QBs – you should know what your teammates like to do, and if you’re in a similar place, get your QB earlier than me. For my last position player before selecting DST and K, I took a swing on Isaiah Spiller of the Chargers. He’s in the top 5 scorers and we know Austin Ekeler doesn’t play 65-70% of the shots. There is always another running back who gets meaningful work and if there is an injury he is likely to be there for most of the work.

Compare how this draft went versus how strategizing would work

repechage from 6th place in a non-PPR 12-team league

. Each draft point has its unique advantages and challenges when it comes to choosing between a group of players. Completing multiple drafts from different starting positions will set you up for success if you don’t receive your draft position until an hour before the draft.

Filed Under: Free Articles

Source link


Comments are closed.